1) Remove the bogie from the car.
2) Turn the bogie upside down with wheels in the air.
3) Press the coupler into bogie.
4) Rotate the coupler 90 degrees, then remove the coupler.
5) Remove the spring and put it someplace safe.
6) Assemble the new TOMIX coupler and observe proper orientation.
7) Put the properly assembled TOMIX coupler into the bogie.
8) Put the spring back on the post.
9) Use tweezers to compress the spring between the post and the coupler.
10) Reattach completed bogie back onto the train car.
11) You're done congratulations.
Peek A Boo spring |
Put that spring somewhere safe |
Bunch of completed bogies |
Looking good. |
Bye bye Rapido |
No comments:
Post a Comment